infsoft Maps Editor
The infsoft Maps Editor is your first step when setting up an indoor positioning system. You can create your location with just a few clicks and then easily manage it afterwards at any time. In the infsoft Maps Editor you can set up outlines of the building, rooms and custom patterns, define points of interest (POI), contextual pathway-relations and much more. The created location is used in all other georeferenced tools of infsoft.
infsoft Maps Editor at a glance:
- Indoor/outdoor mapping
- 2D & 3D maps with custom patterns
- POI management
- contextual pathway-relations
- Landmark POIs for turn-by-turn navigation
The infsoft CMS is closely related to the infsoft Maps Editor and provides the information in list format. You can easily manage attributes for a large number of POI, set information for different menu items and handle data that are not necessarily geo-related. The data are synced with the infsoft Maps Editor and other tools of infsoft.
infsoft CMS at a glance:
- List-based data handling
- POI management
- Administration of menu items
- Publish to live system
infsoft Route Tools
The infsoft Route Tool allows you to test the contextual pathway-relations you have created. You can evaluate the routing (e.g. barrier-free) over several floors and check the priorities of different navigation graphs. The routing and mapping information shown is provided by the infsoft Maps Editor.
infsoft Route Tool at a glance:
- Evaluation of contextual pathway-relations
- Test pathway-relations between start and destination points
- Check on multi-level navigation
- Overview priorities of routes
infsoft Calibration Tools
Once you have set up your floor plans with the infsoft Maps Editor, you can start the calibration process of the indoor positioning system. The infsoft Calibration Tools assist you with the setup of a client-based indoor positioning based on WiFi, Beacons and sensor fusion and are also used for the calibration of the infsoft Locator Nodes. Within the Calibration Tools you can create calibration routes, manage Beacon proximity UUIDs, visualize the detected signalers, check heatmaps of signal strengths and filter access points or beacons that should not be used for the IPS. The tools are synced with the related infsoft Calibration Apps and are exchanging the calibration information.
infsoft Calibration Tools at a glance:
- Setup for client-based IPS
- Setup of IPS for tracking via infsoft Locator Nodes
- Definition of calibration routes
- Proximity UUID management
- Visualization of detected signalers
- Heatmap of signal strengths
- Filter options
infsoft Device Management
With the infsoft Device Management you can check on different attributes of devices by entering the UID or MAC address. The information can be provided by an application or the infsoft Locator Nodes and can cover e.g. the current coordinate, last seen timestamps or vendor details. You can also add different properties to tag the device. The data as well as added tags are exchanged with other infsoft backend tools such as the infsoft Search and Tracking engine.
infsoft Device Management at a glance:
- Overview over device attributes
- Information on device history
- Selection via UID or MAC address
- Adding tags or properties to devices
infsoft Admin Portal
The infsoft Administration Portal offers a variety of configuration possibilities that are available for super users. You can manage registered users, give them access to specific tools and check on the status of backend systems such as the tile service, infsoft GeoTrigger and infsoft Location Analytics.
infsoft Admin Portal at a glance:
- User management
- Assignment of permissions
- Status on backend systems
- Management of API keys
infsoft Locator Nodes Manager
Within the Locator Nodes Manager you can register and organize the infsoft Locator Node hardware in your location. You can set up groups, push firmware updates to the nodes, configure scan intervals and check on the current scans of the Locator Node. The management platform also provides an overview over any downtimes and can be configured with alert mechanisms.
infsoft Locator Nodes Manager at a glance:
- Setup of Locator Node groups
- Firmware updates OTA (over the air)
- Overview over current detections/scans
- Status information and downtime alerts
The infsoft Search engine is a powerful tool to check on all information that has been detected related to a specific device or location. You can search for UIDs, MAC addresses or sort the data by location to get an overview over the transferred data. Beside the device attributes, the current position of the device can be visualized. The raw data of the infsoft Search engine are shared with other tools such as the infsoft Tracking and Analytics engine.
infsoft Search at a glance:
- Search for devices
- Overview over detections within specific locations
- Evaluate device attributes
- Visualization of current device position
infsoft Indoor Tracking
The infsoft Tracking engine enables you to visualize the position of specific devices in real time. You can add attributes to a device (e.g. mail address, name etc.), organize devices in groups and send push notifications to selected users. The engine can also be used for asset tracking and can be linked with other tools such as the infsoft GeoTrigger to define alerts when a devices enters/leaves a defined area.
infsoft Indoor Tracking at a glance:
- Visualization of devices within map
- Search for specific devices and attributes
- Push notification management
infsoft Diagnostics provides an overview over the status of all server instances and their activities. Users can check on possible downtimes and historical data.
The infsoft GeoTrigger allows you to create geofences with different criteria within your location. You can set up different event triggers for the case that a device enters or leaves a specific area, create counts for specific hot spots or add tags to devices based on their behavior. The information is synced with other infsoft backend tools such as the Search-, Tracking and Analytics engine.
infsoft GeoTrigger at a glance:
- Specific detection areas
- Different event triggers
- Push notifications & callback URLs
- Location based services/marketing
infsoft Indoor Analytics
infsoft’s analytics engine visualizes detected devices within the floor plans and enables real time monitoring of motion profiles. You can measure frequencies in specific areas, create time- and location related analysis and combine the system with infsoft GeoTrigger to enrich your data. The live scripting engine can filter information or visualize links between data in real time and historical view. The tool also provides heat map visualization and the tracking of navigation paths.
infsoft Indoor Analytics at a glance:
- Real time indoor analytics
- Motion profiles
- Frequency measurement
- Time- & location specific analysis
- Data enrichment
- Live scripting engine
infsoft Beacon Management
The infsoft Beacon Management tool simplifies the administration of the beacons within your location. You can maintain and register beacons, set their position within the map and monitor the battery status including historical data such as downtimes.
infsoft Beacon Management at a glance:
- Overview over all beacons
- Registration of new beacons
- Localization within map
- Beacon Alive with battery status and downtimes
Test the infsoft tools for free!
Would you like to know more about the infsoft tools and test the multiple functions for free and without any obligation? Register now for the infsoft Developer Portal.